Label Management in Pharmaceutical Enterprises under the GMP System
Classification: Q&A
Release time:2023-02-06 09:34
Label management is a critical tool for traceability of materials, equipment, and products. Effective status‑labeling practices help prevent errors and mix-ups, ensuring product quality and patient medication safety, while also safeguarding the personal safety of operators and the operational integrity of production equipment.
In the previous article, we introduced the equipment management module, one of the six major systems in GMP inspections. This article will examine the labeling management module from several perspectives, including facility and premises identification, equipment labeling, material labeling, and cleaning‑area labeling.
Factory Facility Labeling Management:
Facility and area status signage refers to signs that accurately and clearly convey relevant information about a specific item, area, or room, including the item’s or room’s/area’s name, specifications, quantity, and current status—such as cleanliness, performance, quality, or usage.
01 Naming of Buildings
For ease of identification, building names should ideally reflect their function or be based on their physical characteristics, such as “Formulation Building,” “QC Building,” or “Administrative Building.” Each building should be assigned a unique identifier (code), for example, “Formulation 1,” “Extraction 2,” or “Warehouse 1.” Naming and numbering may employ Chinese characters, pinyin combined with Arabic numerals, or other formats—there is no rigid requirement; the key is to ensure uniqueness. If the plant area is large, roadways should also be considered for naming.
02 The name and number shall be clearly marked.
The names and identification numbers of factory buildings and functional spaces shall be clearly marked using appropriate methods. Font colors should be consistent with the characteristics of the respective buildings and spaces, and within the same building, the numbering system should be essentially uniform.
03 Naming and Numbering of Functional Rooms
The naming of functional spaces shall comply with relevant standards and emphasize the uniqueness of their identifiers (codes). A management document should be prepared to address the issue of functional‑space numbering, facilitating operational procedures. The specific content of these identifiers (codes) may be tailored to the organization’s particular circumstances. To ensure both the uniqueness and recognizability of these identifiers, a building‑level identifier (code) may be used as a prefix—namely, building number + floor number + functional‑space location code (for reference purposes).
04 Common Status Indicators for Functional Rooms
(1) Production Status Indicator : Process step / workstation / operating room number / name of the product currently being manufactured, batch number, quantity information, and production stage, with the production status clearly indicated.
(2) Clearance/Cleaning Status Label : Information including the name of the workstation or operating area, the name/material/batch number of the previous batch, the intended product/material/batch number for the next production run, the date of area clearance/cleaning, the expiration date, and signatures.
Equipment Identification Management:
Equipment identification can be categorized into identifiers for production equipment, utility equipment, inspection equipment, and the instruments incorporated within these devices.
01 Production Equipment Status Labeling
Equipment status identification comprises dynamic and static identifiers.
Dynamic signage It refers to the identification marking applied when production equipment is in operation, which includes the equipment number as well as the name and batch number of the product currently being manufactured.
Static identification This refers to the labeling indicating that equipment is in a non‑production state, and it primarily includes cleanliness status labels and performance status labels. Cleanliness status labels comprise “cleaned” and “to be cleaned.” The “cleaned” label shall specify the cleaning personnel, the date of cleaning, and the validity period. Cleaning must be performed promptly when changing products, when switching batch numbers for the same product, or upon completion of continuous production according to the prescribed procedures. While the equipment remains uncleaned, it shall bear a “to be cleaned” label.
Equipment performance status labels are primarily used when the equipment is in non‑normal operating conditions, such as during maintenance, repair, or shutdown. Equipment that has been taken out of service should be promptly removed from the production area. Equipment undergoing validation should be marked with dedicated identification.
02 Utility Engineering Identification
For water systems, purified air-conditioning systems, compressed-air systems, and the like, at least “Run,” “Standby,” and “Fault” indicators shall be provided on the host equipment.
For fixed piping systems, in accordance with the “Procedures for the Identification and Management of Process Piping,” pipelines shall be painted in different colors based on their contents. Major fixed pipelines connected to equipment must be clearly labeled with the name of the conveyed medium and the flow direction, ensuring that pipeline information is readily identifiable and helping to prevent contamination, confusion, and errors. Pipeline identification tags should be installed primarily at pipeline origins, terminations, intersections, bends, valve locations, and on both sides of wall penetrations.
In addition, numbered tags shall be affixed to the following pipeline ports: process water service points and sampling points; utility media service points and sampling points; valve identifiers; and operator‑interface components. The numbers (codes) on these tags shall be assigned with uniqueness in mind.
03 Inspection Equipment Identification
The status indicators for inspection equipment are generally divided into Intact (in operation), standby, out of service Several types exist. “Operational” indicates that the instrument is in use and is typically marked in green; “Standby” signifies that the instrument is not currently in use and is usually indicated by a yellow label; “Out of Service” is typically denoted by a red label, signifying that the instrument has malfunctioned, been damaged, or been decommissioned and scrapped, and therefore requires repair or removal from the laboratory.
04 Measurement Labeling
Measuring instruments, meters, and equipment shall be assigned unified identification codes, managed by designated personnel, with clearly defined responsibilities. Labels shall indicate the instrument’s calibration status, including the calibration date and expiration date.
Measuring instruments, meters, and equipment shall bear a weekly inspection certificate issued by the verification authority, affixed to a visible location on the device. Prior to each production batch, verify that the equipment is within its valid verification period.
Material Identification Management:
Material identifiers typically convey three key pieces of information: the material’s identity, its traceability throughout the handling process, and its quality status. The purpose of using material identifiers is to prevent confusion and errors, thereby avoiding contamination and cross‑contamination of materials and products. If a material identifier is lost, rendering the material unidentifiable, it shall be handled in accordance with the deviation procedure.
01GMP Requirements for Material Information Labeling
(1) Requirements for the Labeling of Raw and Auxiliary Materials
GMP stipulates that raw materials and excipients in the storage area shall be appropriately labeled, with at least the following information indicated:
① The designated material name and the internal material code of the enterprise
② Batch number assigned by the enterprise upon receipt
③ Material quality status (e.g., pending inspection, approved, rejected, sampled)
④ Shelf life or retest period: All ingredients used in the production of products from the same batch number shall be stored together and clearly labeled.
(2) Requirements for the labeling of intermediate products and products awaiting packaging
Intermediate products and products awaiting packaging shall be clearly labeled, indicating at a minimum the following information:
• Product name and the company’s internal product code
•Product batch number
• Shelf life, retest period
• Quantity or weight (e.g., gross weight, net weight, etc.)
• Production process
• Production Phase
• Product quality status (if applicable, e.g., pending inspection, approved, rejected, sampled)
(3) Requirements for the identification of nonconforming materials, in-process products, products awaiting packaging, and finished products.
Each packaging container of nonconforming materials, in-process products, products awaiting packaging, and finished products shall be clearly and conspicuously labeled and stored appropriately within the quarantine area.
(4) Requirements for the Labeling of Packaging Materials
Each batch or each issuance of packaging materials or printed packaging materials that come into direct contact with the product shall be clearly identified with a label indicating the name and batch number of the product used.
02 Use and Management of Material Information Labels
Enterprises shall establish written operating procedures for the management of material information labeling, covering the formats for labeling materials and products, as well as the procedures and associated records for the issuance, use, destruction, and control of material information labels.
It should be specifically noted that the receipt, issuance, use, and disposal of material labels must be managed by designated personnel and documented. With respect to the identification of other material information, enterprises shall determine, based on actual usage, whether to establish records for receipt, issuance, use, and disposal; however, they must have established management procedures for the identification and labeling of such materials.
The application of material and product status labels shall clearly indicate the historical status of materials, intermediate products, and products awaiting packaging. Generally, when a material’s status is changed, the new status label should not completely cover the previous status label.
(1) Use of Material Information Labels
(1) Affix different information labels according to the material’s stage of use.
The standard procedure is as follows: After preliminary acceptance, where applicable, a “Pending Inspection” label is affixed to the corresponding storage location or area, or a “Pending Inspection” sign is placed. In accordance with the company’s material management procedures, the materials are subjected to appropriate inspection and evaluation, after which they are classified as either “Conforming” or “Non‑conforming” and appropriately marked. Material labels typically include the material name, specifications, material code, supplier batch number, internal batch number, date of manufacture, expiration date or re‑inspection period, storage conditions, and the receiver’s name/date.
(2) Affix intermediate product labels to intermediate products.
It typically includes the intermediate product’s name, code, batch number, expiration date or re‑inspection period, gross weight, net weight, and production stage, among other details.
(3) When using unprinted blank large boxes, blank drums, or containers, product labels shall be affixed.
Product labels typically include the product name, batch number, specifications, date of manufacture, expiration date, package quantity, gross weight, dimensions, storage conditions, manufacturer, manufacturing address, postal code, telephone and fax numbers, and shipping precautions.
(4) Finished-product cartons/containers that are nonconforming shall be labeled with a finished-product zero‑box label.
The finished‑product case label shall include the product name, batch number, specification, date of manufacture, expiration date, quantity, and the signatures and dates of the operator and the reviewer.
(5) Waste materials shall be labeled with waste tags.
(6) Residual materials shall be labeled with a residual-material label.
The remaining material label typically includes the product name, batch number, specifications, date of manufacture, expiration date, quantity, and the signatures/dates of the operator and the reviewer.
(7) Returns must be affixed with a return label.
Return labels typically include the return name, return source, material code, return batch number, receiving batch number, production date, expiration date, and recipient/date.
The placement of material identification labels and material status labels shall be appropriate and relatively centralized, with a clear sequence or orientation. Generally, these labels should be affixed near the original supplier’s product label, ensuring that the information on the original supplier’s label or the original material label remains complete, legible, and easily readable. However, an appropriate method must be employed to distinguish between the original label and the currently used label; for example, an “X” may be marked on the label to indicate the distinction.
(8) The pending inspection area, the non-conforming product area, and the return area shall each be separately isolated.
The corresponding areas should generally be clearly marked with status indicators and restricted to authorized personnel only. Such areas may be physically segregated using barriers, fencing, or other appropriate measures (which may be locked if necessary). The pending‑inspection area, the nonconforming‑goods area, and the returned‑goods area may also be stored in separate, enclosed storage facilities. In these cases, it is sufficient to provide area/location status signs or location‑status labels; however, procedures must be in place to regulate access, use, and management of these areas.
(9) Sampling labels are typically affixed to the individual packaging or containers of materials and products after sampling is completed.
If an enterprise uses restricted‑release labels, they must be strictly controlled, and appropriate measures or procedures must be implemented to ensure that such labels are clearly distinguishable from qualified‑release labels, thereby preventing the inadvertent release or misuse of materials and products subject to restricted release. Restricted‑release labels may not be used in the production of finished products; they are intended primarily for research and other non‑production purposes.
(10) For returned items, they shall be stored in the returns area upon receipt and marked as pending inspection.
In accordance with the enterprise’s established return‑management operating procedures, products are classified as either conforming or nonconforming following inspection and evaluation, and then transferred to the appropriate storage area.
(11) For materials with a specified shelf life, once the expiration date has passed, they shall be immediately marked as nonconforming and handled in accordance with the nonconforming product handling procedure.
(II) Management of Material Status Labels
The enterprise’s quality management department is responsible for establishing and implementing management procedures for the receipt, issuance, use, and destruction of pass/fail labels for materials and products, and for determining the transition among the following quality statuses: from pending inspection to pass; from pending inspection to fail; and from pass to fail.
With regard to the affixing of quality‑status labels and the installation of area‑ and location‑specific quality‑status signage, responsibility for these tasks shall be assigned to the relevant departments or personnel as specified in the enterprise’s established management procedures. The Materials Management Department is responsible for the receipt, issuance, use, and destruction of pending‑inspection labels for materials and products, as well as for maintaining the corresponding pending‑inspection status markings—namely, marking returned items as pending inspection upon receipt; marking incoming materials as pending inspection upon acceptance; marking non‑released finished goods as pending inspection upon warehousing; and marking materials that have been admitted under deviation conditions as pending inspection.
Cleaning status indicator:
Cleaning status labels are generally categorized, based on their intended use, into three types: equipment cleaning status labels, container and utensil cleaning status labels, and cleaning tool cleaning status labels. The label content typically comprises two types: “cleaned” status labels and “to be cleaned” status labels.
The content of the cleaned‑state label shall include the name of the equipment/container/cleaning tool, the person who performed the cleaning, the cleaning date and time, the expiration date, the reviewer, and any remarks. The to‑be‑cleaned status label may simply indicate “To Be Cleaned,” along with the name of the person who marked it and the date and time of marking.
01 Equipment Cleaning Status Label
Upon completion of production, a label indicating the equipment’s cleanliness status shall be affixed to the equipment, specifying whether it has been cleaned or remains to be cleaned. A color‑coding system shall be used: green denotes “cleaned,” and red denotes “to be cleaned.” In accordance with the workshop equipment cleaning procedure, the “to be cleaned” period is set at four hours.
Once the equipment has been cleaned, if it will remain unused for an extended period—such as more than two weeks—simply affix the “Idle Equipment” status label; the cleaning label is no longer required.
Even after equipment has been thoroughly cleaned and placed in an idle state, its surfaces and internal walls must continue to be kept sanitary. “Idle” does not mean that cleaning is no longer required.
02 Label for the Cleaning Status of Containers and Utensils
Color‑coding is employed for management, with green and red designations: red indicates “to be cleaned,” while green signifies “cleaned.” All production‑related containers and equipment—such as filter cloths, connectors, and graduated cylinders—must display a cleaning‑status label. However, not all items used for containment require such labels; certain cleaning tools are instead marked with hygiene‑tool cleaning tags. The document stipulates that all production tools must be assigned unique identification numbers. For small tools or containers that are difficult to tag individually, items of the same type may be grouped under a single number and a single label.
03 Cleaning Tool Cleanliness Status Indicator
According to the document, cleaning tools must be cleaned immediately after use, and their status—“Cleaned” or “To Be Cleaned”—must be clearly indicated. When a tool is in use, the corresponding status label should be removed. The document also stipulates that all tools must be managed by unique identification numbers. For cleaning tools that are difficult to affix with status labels, items of the same type may be assigned a single identifier, with one label attached.
04 Precautions
(1) Since the cleanliness‑status signage is hung inside the workshop, it should be made of a durable material that is resistant to detachment, mold, corrosion, and static electricity.
(2) The two status indicators—“Cleaned” and “To Be Cleaned”—may be implemented as an integrated double-sided design.
(3) Rooms, equipment, and tools that display a “To Be Cleaned” status label, lack a “Cleaned” status label, or bear a “Cleaned” status label that has expired shall not be used.
Proper labeling is a prerequisite for ensuring that critical elements such as equipment, materials, and cleaning status remain under strict control throughout GMP‑compliant manufacturing activities. It is also an effective practice that helps enterprises prevent errors and mix-ups, avoid contamination and cross‑contamination, and enhance their overall quality management capabilities.